Contact Us

↓

Research on the Application of Methanol and Methane in SOFC Power Generation Systems


Release Date:

2026-06-01

As the global energy landscape transitions toward low‑carbon solutions, high‑temperature solid oxide fuel cells (SOFCs) have emerged as a research hotspot in the fields of distributed power generation and mobile energy systems, owing to their high efficiency, broad fuel flexibility, and substantial waste‑heat recovery potential. Compared with conventional hydrogen fuels, methanol and methane—both carbon‑based fuels—offer distinct advantages and pose unique challenges when integrated into SOFC systems; their internal reforming mechanisms and electrochemical coupling characteristics are pushing the boundaries of fuel cell technology.

As the global energy landscape transitions toward low‑carbon solutions, high‑temperature solid oxide fuel cells (SOFCs) have emerged as a research hotspot in the fields of distributed power generation and mobile energy systems, owing to their high efficiency, broad fuel flexibility, and substantial waste‑heat recovery potential. Compared with conventional hydrogen fuels, methanol and methane—both carbon‑based fuels—offer distinct advantages and pose unique challenges within SOFC systems; their internal reforming mechanisms and electrochemical coupling characteristics are pushing the boundaries of fuel cell technology.

Methanol: A Commercialization Breakthrough for Low-Cost Hydrogen Carriers

Methanol, as an efficient hydrogen carrier, exhibits a liquid‑state at ambient conditions, significantly reducing storage and transportation costs. Moreover, it can be used to produce hydrogen on‑site via reforming, offering a flexible fuel‑supply solution for solid oxide fuel cells (SOFCs). A methanol–SOFC power‑generation system developed by a team at the Ural Federal University in Russia employs an air‑reformer to split methanol into a mixture of hydrogen and carbon monoxide; this gas is then fed into the fuel cell stack, achieving a power‑conversion efficiency of 42%, far surpassing that of conventional internal‑combustion engines. The key to this technological approach lies in the low‑temperature controllability of the methanol‑reforming reaction: at the SOFC’s operating temperature of 600–700°C, methanol spontaneously decomposes into a hydrogen‑rich gas, thereby eliminating the high energy consumption and complex control requirements of external reformers.

The 5 kW‑class methanol‑SOFC system jointly developed by China Hydrogen United Technology and the Ningbo Institute of Materials, Chinese Academy of Sciences, employs a thermodynamic coupling design that directly uses the high‑temperature stack exhaust (600–800°C) to preheat the methanol reformer, boosting the system’s fuel utilization efficiency to over 85%. The system utilizes a Ni‑YSZ anode catalyst; by optimizing the methanol-to‑steam ratio (S/C = 2–3), it effectively suppresses carbon deposition, maintaining a power degradation rate of less than 0.5% per day during a continuous 1,000‑hour test. Notably, the CO produced in the methanol reforming process is not only rendered non‑toxic within the SOFC but can also be further converted into H₂ via the water‑gas shift reaction, thereby establishing a “self‑purifying” fuel cycle.

Methane: An Energy-Efficiency Revolution in Internal Reforming Technology

As the primary component of natural gas, methane can be directly utilized in solid oxide fuel cells (SOFCs) via two pathways: external reforming and internal reforming (DIR‑SOFC). A DIR‑SOFC system jointly developed by Tsinghua University and the University of Tokyo achieves simultaneous methane reforming and power generation within the cell, thanks to optimized anode materials and innovative flow‑field design. Experimental results show that, at an operating temperature of 750°C, the system attains a methane conversion rate of 74.7%, with a power‑to‑syngas (H₂ + CO) production efficiency ratio of 3:1, and the product distribution can be flexibly tuned by adjusting the current density.

Breakthroughs in internal reforming technology hinge on multi-scale materials design. The research team employed machine-learning–assisted FIB‑SEM three-dimensional reconstruction to elucidate the impact of carbon deposition on the anode’s microstructure: although carbon deposition reduces porosity, it also establishes an electronic conduction network, reducing the anode’s tortuosity by 15% and thereby enhancing local current density. Building on this insight, a gradient‑structured anode—featuring a high‑porosity YSZ layer adjacent to the electrolyte and a high‑Ni‑content catalyst layer near the fuel channel—achieved an ohmic resistance growth rate of less than 0.02 Ω·cm² per thousand hours during a 1,000‑hour durability test.

Technical and Economic Comparison and System Integration Challenges

From a fuel-cost perspective, methanol (around 2,500 yuan/ton) offers a price advantage over methane (approximately 4,000 yuan/ton); however, methane’s calorific value (55.5 MJ/kg) is 2.4 times that of methanol (22.7 MJ/kg). In terms of system efficiency, the methanol‑SOFC, which eliminates the need for an external reformer, achieves an energy density of 1.2 kW/L—50% higher than that of a methane‑based system (0.8 kW/L). Nevertheless, methane exhibits a significantly higher carbon‑atom utilization rate (theoretical 100%) compared to methanol (theoretical 75%).

At the system integration level, both fuel types face challenges in managing thermal stresses. The two-phase flow (gas–liquid mixture) generated during methanol reforming can readily induce localized pressure spikes within the flow channels, necessitating a cross‑type channel design to enhance forced convection. COMSOL simulations indicate that a cross‑flow channel with a 90° intersection angle can improve the uniformity of methanol concentration distribution by approximately 30%; however, the corner radii at the intersections must be maintained at 0.5 mm or greater to prevent stress concentrations. For methane‑based systems, the highly endothermic internal reforming reaction (ΔH = −206 kJ/mol) gives rise to an anode temperature gradient exceeding 200 °C/cm, requiring the optimization of fuel‑distribution strategies through multiphysics coupling models.